40
instructions to reverse the door swing.
solid door
important notes:
Read all the instructions before starting.
0
Handle parts carefully to avoid scratching
or grazing.
0
0
0
important
: Once you begin, do not move the
cabinet until door-swing reversal is completed.
$
TOOLS YOU WILL NEED:
Phillips head screwdriver
DOOR PARTS:
#8 SCREWS
(18x)
STRIKE PLATE
(no hole)
STRIKE PLATE
(with strike)
DOOR HINGE
(2x)
INNER DOOR
DOOR PANEL
#8 S CREWS
(18 pieces)
1
BEFORE YOU BEGIN
Unplug the dryer from electrical current.
2
REMOVE THE DOOR
3
REVERSE THE DOOR PANEL
INNER DOOR
DOOR FRAME
solid door
glass door
Set screws down by their related parts to
avoid using them in the wrong places.
Normal completion time to reverse the
door swing is between 30 to 60 minutes.
PLATE (w/o perforation)
LOCK PLATE
(with perforation)
HINGES (2 pieces)
Open the door to approximately 90 degrees.
Remove the bottom screw from each hinge. Insert
these screws about half way into the UPPER holes
of each hing on the other side. Loosen upper screw
from each hinge. Remove the door from the dryer
by lifting it up and out. Remove the two remaining
screws and keep them in site.
Placing the door on a soft protected flat surface,
remove the 4 screws from the hinges and the 2
screws on the handle side.
Separate the door panel from the inner door by
pulling it towards you.
54
Содержание SMV630DEWWY00
