mabe RMV21WI, Руководство пользователя

Страница: 31 / 52

Do not connect your refrigerator to the AC outlet.
Install an automatic voltage regulator with a minimum force of
1000 Watts.
Make sure that the regulator can withstand the power changes
that occur in your area.
Ask a qualified electrician to inspect the wall outlet and the
electrical circuit, to ensure that the circuits is properly grounded.
To ground the circuit, follow the grounding regulations and call
a qualified electrician.
If the AC power cord is damaged, it must be replaced by
an electrician from an Authorized Center, in order to avoid
any risk of accident.
29
heating of areas near to the freezer
Your freezer comes equipped with a device that prevents
condensation. The heating of some external zones of your
refrigerator is normal. This prevents condensation of the drops of
water on the exterior of your refrigerator. However, in conditions
where there is high atmospheric temperature and humidity, a light
film of condensation could form. Dry this with a soft cloth.
first connection
If you live in an area where are power surges, exercise the following
precautions:
Once your refrigerator is in place, wait 4 to 6 hours before
connecting it so that the gas and the compressor oil settle.
Before connecting the refrigerator, turn the refrigerator
temperature control or adjust the temperature level of the display
to mid-position (between 4 and 6).
Connect the plug to the wall AC outlet.
Allow it to operate empty and with the doors closed for 4 hours
before loading with food.
Avoid opening the door so that it can reach the desired
temperature.
If you want to place your refrigerator in another location,
disconnect it before moving.
Once it is in its new location, repeat the before mentioned
steps.
•
•
•
•
•
•
•
•
•
•
•
•
•