mabe aqua saver, Инструкция по эксплуатации

Страница: 54 / 111

54
Program selection
Water level
Washing level
Spin level
1
2
3
4
Control panel
LMH19585XPNYS0 and LMH19585XPNYU0 models
5
6
2
5
Personal touch
Start/pause
Delay start
Alarm
7
8
9
1
2
3
5
4
8 6 7 9
Operation sequence: To start operating, turn knob 1 and place the indicator on the program
o f your choice. Turn knobs 2, 3, 4 and 5 to select the different washing options according to
your laundry load. Press start/pause (botton 7).
Temperatures
Turn the knob to switch between the available
programs according to the type of laundry.
Use the cycles recommended for each type of
clothes to obtain top performance in washing
and care for your clothes.
There are four water l eve ls and an
automatic sensor. Select the one you need
or allo
w the automatic sensor to do it for
you.
Note: As this washing machine saves a great
amount of water, you will notice that the
clothes are not completely submerged in
water. This is normal.
Select be tw een the 4 spin levels, or allow the
automatic sensor to do it for you.
There are 4 levels and one automatic level,
select according to how dirty your clothes are,
or allo w the automatic sensor to do it for you.
Select between the 4 temperature levels, or
allow the automatic sensor to decide
according to the selected program
(automatic sensor position).
Repeatedly press the selection button to
choose the sepa
rate w ash cycle stages or the
combination of stages that you require to
only wash, only rinse, wash and spin, etc. The
lights will turn on to indicate the selected
features.
With this button you start running your
washing machine or pause it once it starts. To
restart just press the button once more.
This button allows you to program the time
at which you need the wash cycle to start.
Press the delay start button repeatedly until
the screen displays the delay time in which
your washing machine will start to run. The
amount is shown in minutes with 30 minute
intervals.
By just pressing it, this button allows you to
activate or deactivate the end-of-cycle alarm
that consists of an audible signal once your
washing machine completes the wash cycle.
Once the alarm is acti v ated, the alarm wil l
turn on a red led on the washing machine
display.