Maas AHT-9-UV, Руководство пользователя

Страница: 58 / 72

53
Make MSK call with the transceiver
1)
2) Power on, then select the channel with MSK signal
Press [ ] key, LCD displays “
CALL/DTMF? ”,
then press [ ] – [ ] keys to make call with the desired
call list message. If the corresponding call list has not been
edited, it will sound “DU”.
e.g.: program the above frequency and MSK signal into two radio.
input ID code 1234 into radio A, and input 2345 into radio
B. Press [ ], LCD displays “
CALL/MSK? ”,
then press [ ], you can call B with A. if you want to call
A with B, press [ ], LCD displays “
CALL/MSK? ”,
then press [ ], that is to say, if you want to call one radio,
just input the ID code of that radio.
2-Tone Part
Edit 2Tone message:
Step 1: Edit the Fast Call list via programming software, radio can store up to 10 groups
(0-9) last calling list in total
Step 2: Input the encoding-requested A-Tone (the first tone), B-Tone (the second tone)
and the gap time between A-tone and B-tone, the default setting is 100S
In encoding, A tone will sound 1S while B Tone will sound 3S. But when there is
only A tone in the call list as group call tone, A tone will sound 5S. Please refer to
52
Step 3: Input corresponding ID code in the calling list. ID code should be corresponding to
the one in the CallList, e.g.: if ID code is 1234, the corresponding callList is Group 1
(Picture 3)
Picture 3
Step 4: Set the optional signal of the desired channel to be MSK. Click “More” after every
frequency you edit, program it in the popup (Picture 4)
Picture 4