Maas AHT-9-UV, Руководство пользователя

Страница: 52 / 72

The deputy radio normally power on. Connect master and deputy
one with the wired cloning cable.
Press PTT and [ ] to turn on the master radio, enter the wired
46
except [ ] or [ ] and [ ] to exit.
5) FM radio storage
Under FM frequency mode, press [ ] and then press[ ],
the channel number for storage blinks at the right of the screen.
press [ ] or [ ] or use number key to select the desired
channel number, press [ ] to confirm and then back to the
receiving mode.
6) FM radio channel delete:
Under FM memory mode, turn off the radio, press [ ] to turn
on the radio, you will see “
DEL ? ” in the screen and the channel
number blinks. press [ ] or [ ] to choose the channel
number you want to delete, press [ ] to confirm. Repeat this
operation, you can delete all memory channel, 25 in maximum.
Prepare 2sets of AHT-9-UV, 1pcs specific wired cloning cable.
Master radio (sending messages when in wired cloning)
Deputy radio (receiving and storing messages when in wired cloning)
Steps of wired clone
1)
2)
WIRE CLONE 8)
47
clone state. The “Clone” will be heard, LCD displays “ CLONE ”
Press [MONI] key of the master radio to start wired clone. During
cloning, the master radio displays "
Sending " and deputy one
displays " End ". If cloning succeeds, the master radio returns to
the clone preparation state, and it lights orange. it displays " Error ".
Please check the cloning cable and then press [MONI] to enter
cloning state again.
3)