M7 DS-1813, Руководство пользователя

Страница: 23 / 30

8
3. POWER BAR
This Lithium-Ion battery pack is equipped with a POWER BAR, which is used to display the battery
pack’s remaining run time. Press the POWER BAR button to display the LED lights. The LED lights
will stay lit for approximately 4 seconds.
NOTE: The POWER BAR can be used whether the battery is attached or removed from tool.
80-100% Charge
60-79% Charge
40-59% Charge
20-39% Charge
under 10% Charge
Completely discharged
4. LOW-BATTERY CAPACITY INDICATOR
·
If LED worklights on the POWER BAR begins
to rapidly and continuously flash when the
trigger switch on the wrench is depressed,
the battery pack’s power has run out, and the
battery pack should be recharged.
·
Unlike other battery pack types, Lithium-Ion
battery packs deliver fade-free power for their
entire run time. The tool will not experience a
slow, gradual loss of power as you work. To
signal that the battery pack is at the end of its
run time and needs to be charged, the power to
the tool will drop quickly. The POWER BAR will
begin to display four flashing LED lights when
the battery is completely discharged. When this
happens, remove the tool from the workpiece,
and charge the battery pack as needed.
NOTE:
The POWER BAR may also display four
flashing LED lights due to an overload or high
temperature situation.
5. WHEN TO CHARGE THE BATTERY PACK
Attach the battery pack on the charger to resume
the battery when the battery pack is protected.
The Lithium-Ion battery can be charged at any
time and will not develop a “memory” when
charged after only a partial discharge. It is not
necessary to run down the battery pack charge
before recharging. Remove the battery pack from
the tool when convenient for you and your job.
·
Use the POWER BAR to determine when you
need to recharge the battery pack.
·
You can “top-off” your battery pack’s charge
before starting a big job or long period of use.
6. TO ATTACH BATTERY PACK
WARNING: Use only lithium-ion
batteries with the voltage listed on the nameplate
of your power tool. Using other batteries can lead
to injuries and pose a fire hazard.
NOTE: Use of batteries not suitable for the
machine can lead to malfunctions of or cause
damage to the power tool.
1. Lock the trigger switch on the Impact Wrench
by placing the direction of rotation (forward/
reverse/ center lock) selector in the center
position.
2. Align the raised rib on the battery pack with
the grooves on the bottom of the Wrench, and
then attach the battery pack to the Wrench.
NOTE: Make sure that the latch on the battery
pack snaps into place and the battery pack is
secured to the tool before beginning operation.