M7 DS-1813, Руководство пользователя

Страница: 21 / 30

6
metal items should fall into the opening. It
will also help prevent damage to the charger
during a power surge.
14) Risk of electric shock. Do not touch the
uninsulated portion of output connector or
uninsulated battery terminal.
ADDITIONAL SAFETY RULE
FOR IMPACT WRENCH
1) Hold power tools by insulated gripping surfaces
when performing an operation where the
cutting tool may contact hidden wiring or its
own cord. Contact with a “live” wire will make
exposed metal parts of the tool “live” and shock
the operator.
2) Use clamps or other practical way to support
and secure the workpiece to a stable platform.
Holding the work by hand or against your body
is unstable and may lead to loss of control.
3) Do not drill, fasten or break into existing walls
or other blind areas where electrical wiring may
exist. If this situation is unavoidable, disconnect
all fuses or circuit breakers supplying the
worksite.
4) Always wear safety goggles or eye protection
when using this tool.
5) Bits, sockets, and tools get hot during
operation. Wear gloves when touching them.
6) Wear ear protectors when using the tool for
extended periods. Prolonged exposure to high
intensity noise can cause hearing loss.
7) Use thick, cushioned gloves and limit the
exposure time by taking frequent rest periods.
Vibration caused by hammer-drill or Imapct
wrench action may be harmful to your hands
and arms.
8) Secure the material being fastened. Never hold
it in your hand or across your legs. Unstable
support can cause loss of control and injury.
9) Avoid accidental starting. Be sure the forward/
reverse switch is in the OFF position before
inserting a battery pack. Carrying appliances
with your finger on the switch or inserting the
battery pack into an appliance with the switch
on invites accidents.
10) Remove battery pack before changing
accessories. Accidental starting may occur
because battery appliances with a battery
inserted are in the operative condition.
11) Be prepared for a reaction torque when
“seating” or removing a fastener. The tool
housing may tend to twist in the opposite
direction of bit rotation when “seating” or
removing a fastener, depending on the torque
setting of the tool.
12) Do not run the tool while carrying it at your
side. A spinning bit could become entangled
with clothing and injury may result.
13) Place the tool onto the fastener only when the
tool is switched OFF. Rotating driver tools can
slide off the fastener.
14) Do not use this tool as a drill. Tools equipped
with shut-off clutches are not designed for
drilling applications. The output drive can shut
off automatically and without warning.
15) Be careful when driving long screws. There
is a risk of the tool sliding off the fastener
head, depending on type of socket or bit used.
First test the run-down of a fastener and pay
attention during the screw-driving process to
ensure you do not injure yourself if the tool bit or
socket slides off of the fastener.
16) For best results, your battery tool should be
charged in a location where the temperature
is more that 32° F (0° C) but less that 104°F
(40°C). Do not store outside or in vehicles.
WARNING:
Some dust created by
power Cutting contains chemicals known
to cause cancer, birth defects or other
reproductive harm. Some examples of
these chemicals are: