Safety
SAFETY AND WARNINGS: CHOKING HAZARD - The M3D Pro 3D Printer and its consumables may include small parts that may constitute a choking hazard; additionally, these
products may be used to manufacture objects that may themselves constitute a choking hazard.
The M3D Pro 3D Printer is NOT A TOY; children under the age of 14 should use the product under adult supervision.
CAUTION! The printhead, exposed nozzle, extruded plastic, and areas near the nozzle may be extremely hot. Keep fingers away from the printhead and extruded material unless
it has been unplugged for at least 10 minutes.
Use M3D’s products only as intended, as described by the user manual and/or this agreement and/or described within the software.
Use M3D’s products in a well-ventilated area. Do not leave M3D’s M3D Products running while unattended.
Warning: Please note, the heated bed can: Reach temperatures as high as 90C (194 F) Can cause burns or damage to persons with prolonged contact while in use.
Therefore, it is extremely important that you take necessary precautions to M3D Protect yourself and others, such as pets and children, when using the heated bed.
PRECAUTION - None of components of The M3D Pro 3D Printer or parts printed from it or using M3D filaments are certified for food safety nor should they be regarded as
food-safe therefore should not come in contact with the mouth or foods/liquids that will be ingested by humans or animals.
PRECAUTION - None of components of The M3D Pro 3D Printer or parts printed from it should be used for medical applications, such as but not limited to implantation, drug
delivery, or ingestion.
PRECAUTION - If any allergy develops as a result of direct or indirect contact using M3D’s products, or from the 3D printed objects, discontinue use immediately.
MAINTENANCE - After extended or improper use, the nozzle and/or its cover may need to be replaced or cleaned; the print bed and/or the
material
sheets covering it may need
to be replaced; the extruder may need to be purged or cleaned; and the filaments may need to be purged or replaced.
REPAIR/SERVICE: Repair/Service terms were provided to the purchasing customer in the customer purchase agreement. This agreement may be found by logging into their user
account at "http://www.printm3d.com/"
All parts of the Repair/Service section apply to the purchasing customer / first end-user and are non-transferrable. RETURNS: Return terms were provided to the purchasing
customer in the customer purchase agreement. This agreement may be found by logging into their user account at www.printm3d.com. All parts of the Repair/Service section
apply to the purchasing customer / first end-user and are
non-transferrable. All software sales or licenses are final, non-refundable, and/or non-transferrable.
PART REMOVAL:
B
e mindful of your fingers when using sharp objects
during part removal.
M3D recommends removing the bed from the
printer when possible before attempting to remove a 3D printed object. For tips on removing 3D printed objects see the support page at
"http://www.printm3d.com/support"
