VAN DER GRAAF M
K
II
VERY LOW NOISE POWER SUPPLY
REVISION P
R
B – AUGUST 2017
Copyright © 2017, M2Tech Srl
11
M2Tech
www.m2tech.biz
3. Back Panel
Figure 2
7) Composite outputs.
Connect
M2Tech
units provided with input for composite supply
+5V/+15V/-15V (e.g. the
NASH
) to this outputs using the stock cables. Female 4-pole XLR
sockets.
8) Single voltage outputs.
Connect
M2Tech
units provided with input for single 15V or 9V
supply and maximum current sink 500mA (e.g. the
Young MkIII
) to this outputs, using the
stock cables. Female 5,5/2,1mm jack.
9) Output voltage selectors.
Allow for choosing the voltage provided by outputs 1 and 2.
Select voltage before connecting the units.
10) Power cord socket.
Connect the stock power cord to this socket.
11) Power switch.
Push this switch to toggle
VAN DER GRAAF M
k
II
power. When powering
the unit, the power LED (item 1, Fig. 1, Pag. 9) will glow and the
VAN DER GRAAF M
k
II
will
enter standby.
12) Fuse holder.
It holds 2 slow blow 2.5A fuses.
