M2SYNTH VC Panner Mixer 137, Инструкция по сборке

Страница: 4 / 4

VC Panner Mixer 137 V1b 4
The solder connections to the VU meters are made using some off-cut resistor leads.
Calibration
No calibration requirements.
Specification

Supply v/-12Vdc (note: this module uses two power supply connectors for
load sharing). For the MU version, use the included inline voltage regulator modules
for +/-15V

Supply current: J1 +30mA / -30mA, J2 +36mA / -30mA

Input signal level +/-5V

0-10V control voltages

Main PCB dimensions 175.26 x 151.424mm
Need tech support, post questions on our forum hosted by modwiggler.com