m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860
Table of Contents
MCF-LW12MET Operating Manual
Important safety information
Read this manual before attempting to install the device! Failure to observe recommendations included in
this manual may be dangerous or cause a violation of the law. The manufacturer will not be held responsible
for any loss or damage resulting from not following the instructions of this operating manual.
Do not dismantle or modify in any way.
Avoid mechanical stress
The device is not intended to be used as a reference sensor, and enginko Srl will not be held liable for any damage
which may result from inaccurate readings.
Do not use any detergent or alcohol to clean the device.
Do not mount in horizontal position.
Disposal information for users
Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on
waste electrical and electronic equipment (WEEE).
The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the
product must be collected separately from other waste.
