M2I MIO-LPG00, Руководство по оборудованию, Страница: 9 / 16

Industrial I/O Wireless Device Hardware Manual
M2I Corporation
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea,
Tel: +82-70-465-3366, Fax: +82-31-465-3355,
www.m2i.co.kr
9 / 16
No Name Description
① ANT. LORA Antenna Hole
② USB USB Setup Connector
③ 24Vdc System Power Input (DC 24V)
④ 24V GND System Power GND
⑤ F.G F.G
⑥ PWR LED Power Status Display
⑦ LoRa LED LORA Communication Status Display
⑧ RESET 버튼 System RESET
⑨ MODE 버튼 MODE Operation Button
⑩ FREQ 변경 스위치 Frequency Ch [0...6] Switch
⑪ SF 변경 스위치 SF Setting [0], [7...12] Switch
⑫ RX LED COMM Receive Status
⑬ TX LED COMM Transmit Status
⑭ COMM Serial Communication Connector
Chapter 5 Operation and Settings
5.1 System Configuration
In order to communicate with the I/O wireless device, you must refer to the following information to connect.
5.2 Status LED
The operation status of the status indicator LED is shown below.
LED Status Description
PWR Green ON / OFF ON when Main Power is Input
LoRa Green Transmit Data LoRa Transmit Data Status