4-23-03
4402 N. Selland Ave, Fresno CA 93722 (559) 432-8873 FAX 432-3059
www.m2inc.com Email: [email protected]
FEATURES
Our ALL NEW, GREEN LED, PIC rotator controller is packed with new features including
AUTO-CALIBRATE, AUTO SLOW DOWN as limits are approached, ONE STEP PRO-
GRAMMING saving all changes by exiting the program mode. SOFTWARE UPDATES di-
rectly from our “m2inc.com” website Also included is increased circuitry and reed switch
protection. Of course computer control has also been improved. The new RC-2800PX
now accepts fractional inputs like 138.7 degrees and the Auto-calibrate command from a
computer or remote site. What we did not change is front and back panel layout so it
doesn’t require re-learning the controls and the actual operation is almost identical to the
old units. Everything is just a bit smoother and easier. The new PIC microprocessor lends
itself to easier custom programming for special rotator control functions. This custom pro-
gram can be downloaded directly through the RS-232 port on your RC-2800PX from our
site on the WEB. Of course this new controller works with any of our older OR-2800DC ro-
tators. It can also be easily modified to work with MOST of our older AC (OR-2800AC)
units as well. By ordering an RC-2800PPX controller this design can control a Prop Pitch
Rotator with all the same features. If you have a very custom rotator system using a large
AC or DC motor of almost any voltage or phase (like 3 phase 240 AC) the RC-2800PX
design can control your rotator system. This same controller also controls our line of Ele-
vation rotators (Positioners) like the MT-1000, MT-3000, MT-4000 and the largest, MT-
5000. The Elevation controller can be linked to the AZ controller and both then can be
controlled by computer through a single RS-232 line. We also have a Dual controller (RC-
2800PRKX) in one rack mount case to control an AZ-EL system. The new RC-2800PX
controller it can handle any gear ratio from 1000 to over 50,000:1
Our OR-2800DC rotator is now supplied with a 60” PIGTAIL and a WATER TIGHT
HOUSING for a terminal strip. This creates an easy access, trouble free control cable
connection. Your control cable can have as few as 2 motor wires (see the “size VS dis-
tance” information later in manual) and a small single shielded lead for the position feed-
back.
3
Содержание RC2800PX-AZ
Страница 1: ......
