MODEL: R8-NEIP1
R8-NEIP1 SPECIFICATIONS
ES-9799 Rev.0 Page 1/5
http://www.m-system.co.jp/
Remote I/O R8 Series
POWER/NETWORK MODULE
(EtherNet/IP)
Functions & Features
• Free combination of analog and discrete I/O
• Space-saving
Typical Applications
• Remote I/O for DCS and PLC
MODEL: R8–NEIP1–R[1]
ORDERING INFORMATION
• Code number: R8-NEIP1-R[1]
Specify a code from below for [1].
(e.g. R8-NEIP1-R/Q)
• Specify the specification for option code /Q
(e.g. /C01)
MODULE TYPE
NEIP1: EtherNet/IP
POWER INPUT
DC power
R: 24 V DC
(Operational voltage range: ±10 %; ripple 10 %p-p max.)
[1] OPTIONS
blank: none
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
RELATED PRODUCTS
• PC Configurator cable (model: COP-US)
• PC configurator software (model: R8CFG)
• EDS file
The EDS file and configurator software are downloadable at
M-System’s web site.
PACKAGE INCLUDES...
• Protective cover
GENERAL SPECIFICATIONS
Connection
• Power input or excitation supply: Tension clamp (Front
Twin connection)
Applicable wire size: 0.2 - 2.5 mm
2
Stripped length: 10 mm
• EtherNet/IP: RJ-45 modular jack
• Internal bus or internal power or excitation supply: Via
internal bus connector
Max. number of I/O modules: 16
(Max. consumption current of I/O modules: 1.6 A)
Isolation: EtherNet/IP to internal bus or internal power or
power input to excitation supply to FE1
Status indicators: Power, RUN, MS, NS, LNK1, LNK2
Data allocation: Mode 1, 2
EtherNet/IP COMMUNICATION
Communication Standard: IEEE 802.3u
Transmission: 10BASE-T, 100BASE-TX
Baud rate: 10/100 Mbps (Auto Negotiation function)
Protocol: EtherNet/IP
Connection type: Exclusive owner / Listen only / Input only
Max. number of socket connections: 3
Transmission media: 10BASE-T (STP, Category 5), 100BASE-
TX (STP, Category 5e)
Network topology: Line, star and ring
Max. length of fieldbus segment: 100 meters
IP address: 192.168.0.250 (factory setting);
Only host address in IP address is configurable via rotary
switches, the other items via PC configurator software
(model: R8CFG).
DLR supported
Port No.: 2222, 44818
I/O data size: 40 - 140 byte (configurable with DIP SW)
Status indicator LEDs: MS, NS (Refer to the instruction
manual for details)
INSTALLATION
Power consumption
•DC: Approx. 12 W 24 V DC (@ internal power max. current
