M-system R3-NL1, Инструкция по эксплуатации

Страница: 7 / 8

R3-NL1
P. 7 / 8 EM-8427 Rev.5
■
SetValue [x] FUNCTIONAL BLOCKS
NETWORK TYPE EXPLANATIONS
VARIABLE {Range}
{Default}
nviVal SNVT_lev_percent • Outputs data set to assigned channels.
{-163.85 through 163.830} • Set SNVT_lev_percent for the input types other than
{0} discrete. Change the network variable type according to the
output type if necessary.
• ConfigurationProperty value must be re-read after the
network variable type is changed. Use “ResyncCP” on the
LonMaker.
SNVT_state • For descrete outputs, change the network variable type to
{0 OFF (output open) SNVT_state using integration tools such as LonMaker.
1 ON (output shorted)] Bit 0 through bit 15 of nviVal are applied for ch. 1 through
ch. 16.
CONFIGURATION TYPE EXPLANATIONS
PROPERTY {Range}
{Default}
cpNviType SCPTnvType nviVal type
{SNVT_lev_percent (Use integration tools such as LonMaker to change types.)
SNVT_state}
{SNVT_lev_percent}
cpNviMaxRnge Identical to nviVal nviVal value at 100% output
{ (Identical to nviVal) } Invalid when nviVal type is SNVT_state.
{100.0}
cpNviMinRnge Identical to nviVal nviVal value at 0% output
{ (Identical to nviVal) } Invalid when nviVal type is SNVT_state.
{0.0}
■
GetValue [x] FUNCTIONAL BLOCKS
NETWORK TYPE EXPLANATIONS
VARIABLE {Range}
{Default}
nvoVal SNVT_lev_percent • Data acquired from assigned channels.
{-163.85 through 163.830} • Set SNVT_lev_percent for the input types other than
{0.0} discrete or temperature. Change the network variable type
according to the input type if necessary.
• ConfigurationProperty value must be re-read after the
network variable type is changed. Use “ResyncCP” on the
LonMaker.
SNVT_state • For descrete inputs, change the network variable type to
{0 OFF (input open) SNVT_state using integration tools such as LonMaker.
1 ON (input shorted)] Bit 0 through bit 15 of nvoVal are applied for ch. 1 through
ch. 16.
SNVT_temp • For temperature inputs, change the network variable type to
{-274.0 through 3002.7} SNVT_temp using integration tools such as LonMaker.
CONFIGURATION TYPE EXPLANATIONS
PROPERTY {Range}
{Default}
cpNvoType SCPTnvType nvoVal type
{SNVT_lev_percent (Use integration tools such as LonMaker to change types.)
SNVT_state
SNVT_temp}
{SNVT_lev_percent}
cpNvoMaxRnge Identical to nvoVal nvoVal value at 100% input
{ (Identical to nvoVal) } Invalid when nvoVal type is either SNVT_state or SNVT_temp.
{100.0}
cpNvoMinRnge Identical to nvoVal nvoVal value at 0% input
{ (Identical to nvoVal) } Invalid when nvoVal type is either SNVT_state or SNVT_temp.
{0.0}
cpSendDelta Identical to nvoVal Network variables are sent out when its deviation exceeds the
{ (Identical to nvoVal) } set value.
{0.0} Invalid when nvoVal type is SNVT_state.