M-system R3-GE1 Скачать руководство пользователя страница 7

R3-GE1

5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201  Fax: +81(6)6659-8510  E-mail: [email protected]

EM-8464  Rev.7  P. 7 / 7

TRANSMISSION DATA DESCRIPTIONS

Use the DIP SW located at the side of the module to specify module allocation.
1 module is equivalent to 1 I/O module with 16 words analog input and 16 words analog output.  Max. 8 modules (128 words 
input, 128 words output) transmission is available.  R3-GE1 seems as if max. 8 I/O modules are mounted to 8 slots via Mod-
bus/TCP.
The input of the module is processed as follows.

Modbus Communication

R3-GE1 Module

R3 Base

R3 Communication Module

In responding to the input, the output (Holding Register) command becomes valid via Modbus/TCP communication, and the 
input (Input Register) command is valid in the output.
 
Note:  Do not mount any modules in the slots which are occupied by virtual modules.  If a real I/O module is mounted in the slot, an 

internal bus error occurs and the ERR LED turns on.  Max. 16 real I/O modules and virtual modules are available.   

 

The interface module can not read the data for more than 16 modules.

 

WHEN R3-GE1 IS MOUNTED ON SLOT NO. 2 (4 modules)

Real I/O modules are mounted on Slots No. 1 and 2, however, the network module (R3-NC3) recognizes that each of Slots No. 
1 to 5 is occupied.  That is, R3-NC3 recognizes R3-SV4 mounted on Slot No.1 as it is and recognizes R3-GE1 mounted on Slot 
No.2 as divided into four modules and occupying Slots No. 2 to 5.

SLOT

REAL MODULE VIRTUAL MODULE NO. OF WORDS

Slot No. 1

R3-SV4

R3-SV4

4 Words

Slot No. 2

R3-GE1

R3-GE1 (1/4)

16 Words

Slot No. 3

No module

R3-GE1 (2/4)

16 Words

Slot No. 4

No module

R3-GE1 (3/4)

16 Words

Slot No. 5

No module

R3-GE1 (4/4)

16 Words

Slot No. 6

No module

No module

----

Slot No. 7

R3-NC3

R3-NC3

----

Slot No. 8

R3-PS1

R3-PS1

----

INPUT/OUTPUT DATA

 

MODULE STATUS

Module Status indicates whether individual I/O module is 
mounted or not, normal or not.

0

15

Module 1 (Slot 1)
Module 2 (Slot 2)
Module 3 (Slot 3)

Module 8 (Slot 8)

 

ANALOG INPUT/OUTPUT DATA

0

15

16 bits binary data

1

2

3

4

5

6

7

8

R3-

SV4

R3-BS08

R3-

GE1

R3-

NC3

R3-

PS1

Содержание R3-GE1








Отзывы: