M-system R3-GE1, Инструкция по эксплуатации

Страница: 5 / 7

R3-GE1
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
EM-8464 Rev.7 P. 5 / 7
MODBUS FUNCTION CODES & SUPPORTED CODES
■
Data and Control Functions
CODE NAME
01 Read Coil Status Digital output from the slave
02 Read Input Status X Status of digital inputs to the slave
03 Read Holding Registers X General purpose register within the slave
04 Read Input Registers X Collected data from the field by the slave
05 Force Single Coil Digital output from the slave
06 Preset Single Register X General purpose register within the slave
07 Read Exception Status
08 Diagnostics X
09 Program 484
10 Poll 484
11 Fetch Comm. Event Counter Fetch a status word and an event counter
12 Fetch Comm. Event Log
A status word, an event counter, a message count and
a field of event bytes
13 Program Controller
14 Poll Controller
15 Force Multiple Coils X Digital output from the slave
16 Preset Multiple Registers X General purpose register within the slave
17 Report Slave ID Slave type / ‘RUN’ status
18 Program 884 / M84
19 Reset Comm. Link
20 Read General Reference
21 Write General Reference
22 Mask Write 4X Register
23 Read / Write 4X Registers
24 Read FIFO Queue
■
Exception Codes
CODE NAME
01 Illegal Function X Function code is not allowable for the slave
02 Illegal Data Address X Address is not available within the slave
03 Illegal Data Value X Data is not valid for the function
04 Slave Device Failure
05 Acknowledge
06 Slave Device Busy
07 Negative Acknowledge
08 Memory Parity Error
■
Diagnostic Subfunctions
CODE NAME
00 Return Query Data X Loop back test
01 Restart Comm. Option X Reset the slave and clear all counters
02 Return Diagnostic Register X Contents of the diagnostic data (2 bytes)
03 Change ASCII Input Delimiter X Delimiter character of ASCII message
04 Force Listen Only Mode X Force the slave into Listen Only Mode