R10M-CT4E
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-6247 P. 4 / 7
INSTALLATION
The unit can be removed from the base by pulling out while
pressing the lockslider on the top thereof.
The base does not come with the unit. Please order sepa-
rately.
■
DIN RAIL MOUNTING (PARALLEL)
• Mounting the unit
A) Hook the upper hook at the rear side of the base onto
the DIN rail.
B) Push the lower part of the unit in the direction of the
arrow until the base is firmly fixed to the DIN rail.
A
B
• Removing the unit
A) Push down the lower slider using a minus screwdriver.
B) Pull out the lower part of the unit.
C) Remove the upper part of the unit from the DIN rail.
A
B
C
■
WALL MOUNTING
Refer to “MOUNTING REQUIREMENTS unit: mm [inch]”
on page 3.
Pull out the upper and lower sliders from the base and fix
them with M4 screws (Torque: 1.4 N·m)
