49
BURNERS
They can be removed and washed with
soapy water only.
They will remain always perfect if
cleaned with products used for silver-
ware.
After cleaning or wash, check that burn-
er-caps and burner-heads are dry before
placing them in the respective hous-
ings.
Note: To avoid damage to the electric
ignition do not use it when the burn-
ers are not in place.
CORRECT REPLACEMENT OF THE
BURNERS
It is very important to check that the
burner flame distributor F and the cap C
has been correctly positioned (see fig.
6.1-6.2) - failure to do so can cause seri-
ous problems.
Check that the electrode S (fig. 6.1) is
always clean to ensure trouble-free
sparking.
The ignition plug must be very carefully
cleaned.
Fig. 6.2
GAS TAPS
In the event of operating faults in the gas
taps, call the Service Department.
S
F
C
Fig. 6.1
