M Design DIAMOND Gas 550V, Инструкция по установке и эксплуатации, Страница: 28 / 43

1
2
28
1
3. Manual control (Single line burner)
From the moment the burner is on, you can start
with the flame height control.
The screen will automatically show manual
control ( flame heigt control )
Press on until you see number 15.
This is the maximum flame height.
Choose a flame height from 1 to 15
by pressing or
For all appliances, except for:
850V, 1150V, 550DV en 850DV
Instructions for installation and use DIAMOND Gas 550V-DV-850V-DV-1150V
Keep pressing the button
until 24:00 appears in the top left
corner (1).
Press several times on
until you see “bnd” on the screen (2)
Press shortly on
and
You see the temperature on the
screen. Your remote control is now
connected.
2. Ignite the fire
1. First use (Connect the remote control)
Press simultaneously
on and
You hear the ionisationpen ticking.
The ticking lasts for about 15 sec.
At initial setup, it’s possible that the pilot flame
doesn’t ignite imidiatly because the pipes are not
yet fully deflated. You can try this up to 5 times
before the unit will be placed in safety. If this fails,
pleas contact your installer.
13. Remote control (direct ingnition)