M Design DIAMOND Gas 550V, Инструкция по установке и эксплуатации, Страница: 20 / 43

20
Instructions for installation and use DIAMOND Gas 550V-DV-850V-DV-1150V
9. Positioning the logs, diamond, sapphire and white pebbles
Put the little imitation coal pieces on the burner and here and there between the
Put the big imitation coal pieces around the burner.
Please check that the pilot light is switched off and that the appliance has cooled
down.
• Move the window to the front by pulling it. The window tips open at 45°.
• Arrange the materials supplied. In accordance with your order you will have either
a set of logs, diamond, sapphire or white pebbles. There is an adequate supply of
materials . Our appliance is approved with these materials, so please do not use
other products. Other decorative products are prohibited in our appliances. Please
do not change the delivered quantities
Attention:
Do not put anything on the ignition pin.
To arrange the logs respect the order as follows.
One bag of liite pebbles is delivred with the set. First place de little
pebbles on the burner. Place the big pebbles around the
little pebbles and be carefull to not place big pebbles directly on the
burner.
ATTENTION WHEN USING THE BIG WHITE PEBBLES