M-Audio NRV10, Руководство пользователя

Страница: 19 / 32

19
Control
Call-out
Number #
Control
Picture
Control
Name
Control Description
1 Mix
Control The Mix Control sets the balance between the processed and
unprocessed signal, where the 12 o'clock position outputs
equal amounts of processed and unprocessed signal levels.
Rotate this control clockwise to increase the amount of the
unprocessed signal, and rotate it counterclockwise to increase
the amount of the processed signal in the output of the effect.
2 Rate
Control The Rate Control sets the speed of the Chorus effect. Faster
Rate settings produce special effect sounds, while slower Rate
settings produce more natural "chorusing" effects. Rotate the
control clockwise to increase the
Rate, and counterclockwise
to decrease it.
3 Depth
Control The Depth Control sets the frequency width (sweep width) of
the Chorus effect. Rotate the knob clockwise to affect more
frequencies, and counterclockwise to affect less frequencies.
4 Stereo
Control The Stereo Control contracts or expands the stereo image of
the effect. Rotating the control clockwise increases the stereo
width, and rotating it counterclockwise decreases the stereo
width.
If you are using Chorus on a mono channel of NRV10
interFX (channels 1-4), it is recommended to set this control fully
counterclockwise.
3.5 Distortion
Distortion creates the classic sound of guitar amplifier distortion, and is useful on many
sound sources. Below is an image of Distortion . Refer to the table below the graphic
for details of each control.
Control
Call-out #
Control
Picture
Control
Name
Control Description