4. The ‘Wizard’ reports that its Windows driver file search has found the
M-Audio Delta 1010LT. Click Next>. If announcements that “No Driver
Signature” pop up, ignore them and continue with the installation procedure.
5. Windows is now ready to install the driver files from the specified location.
Click Next>. Windows will start to copy the files and show you a progress
report screen.
6. The Wizard reports that Windows has finished installing the software. Click
‘Finish’. Your Delta 1010LT is ready for action.
After completion of the driver installation, Windows may require you to restart. If it does
request a restart, remove the Drivers CD Disk from the CD drive and respond “Yes.” The
system will restart and your Delta 1010LT is ready for play.
Windows 98 Installation
1. After installing the Delta 1010LT hardware, boot your system and start
Windows. During the Windows boot procedure, new hardware will be
automatically detected by the Add New Hardware Wizard. Click ‘Next>’.
2. The ‘Add New Hardware Wizard’ will now ask how you want to find the driver.
"Search for the best driver for your device" is already selected. Click ‘Next>’.
3. Windows will give you a selection of locations to search. Make sure that only
“Choose a Path” is checked, or click on the check box to do so. Insert the
Driver CD into your CD ROM drive. Type in the drive letter of your CD drive
(we will assume here that it is D:\) and the path to the Delta drivers, which
will be D:\Delta Products\Delta98. Click ‘Next>’.
4. The ‘Wizard’ reports that its Windows driver file search has found the
M-Audio Delta 1010LT. Click Next>.
5. Windows is now ready to install the driver files from the specified location.
Click Next>. Windows will start to copy the files and show you a progress
report screen.
6. The Wizard reports that Windows has finished installing the software. Click
‘Finish’. Your Delta 1010LT is ready for action.
After completion of the driver installation, Windows may require you to restart. If it does
request a restart, remove the Drivers CD Disk from the CD drive and respond “Yes”. The
system will restart and your Delta 1010LT is ready for play.
Windows 95 Installation
1. After installation of the Delta 1010LT hardware, boot your system and start
Windows. During the Windows boot procedure, new hardware will be
automatically detected.
2. Choose the Install of "driver from disk provided by hardware manufacturer,"
then click OK.
3. An ‘Install From Disk’ will prompt you to copy files from the
A:\ drive. Insert the Driver software CD into your CD ROM drive. Type in the
drive letter of your CD drive (we will assume here that it is D:\) and the path
10
