M-Audio DCP-300 Скачать руководство пользователя страница 55

Страница: 55 / 62

User Guide

DCP-300

10 Care and Maintenance

As with all furniture, avoid placing items directly on the piano (such as drink glasses, potted plants, etc.) that

may cause moisture damage to the piano’s finish.

Cleaning should be done with a soft, dry cloth (or if necessary, a slightly damp cloth). Chemical cleaning

products should not be used, as they may harm the piano’s finish.

11 Troubleshooting

Your DCP-300 digital piano has been tested under a wide variety of conditions to ensure trouble-free

performance. In the event that you do experience any difficulty, this section provides tips to help resolve some

basic issues you may encounter.

Problem:

My piano keyboard is working correctly, but the pedals do not seem to be working.

Solution:

Make sure the Pedal Board cable is firmly connected to the Pedal Connector on

the piano’s rear panel.

Problem:

My piano is on with the volume turned up, but I do not hear any sound when I play the

keyboard.

Solution 1:

Local On/Off may be set to Off, or the currently selected voice’s volume may

be turned down. In either case, a Piano Reset will fix the problem. To do a

Piano reset, press the Reverb button and Chorus button at the same time for

one second.

Solution 2:

If the Master Volume knob is turned up, but you do not hear sound from

the piano’s built-in speakers, make sure nothing is plugged into Headphone

Output 1.

Problem:

When I turn on the piano, the LCD does not light up, and I do not hear any sound.

Solution:

Make sure one end of the AC cable is connected to the jack on the piano’s rear

panel, and that the other end is plugged into an electrical outlet. If the AC cable

is plugged into a power strip, make sure the power strip is switched on.

Problem:

My piano is not being recognized by my music software.

Solution:

The USB cable between the computer and the DCP-300 piano must be

connected (and the piano powered on) before the music software is launched.

With the USB cable connected and DCP-300 powered on, try quitting the

software and then launching it again.

Refer to the documentation which came with your software to learn how to

make sure DCP-300 is properly selected within the software.

Note that on Windows XP computers, DCP-300 will show up as

“USB Audio Device.”

Содержание DCP-300































































Результаты поиска

Содержание DCP-300

Отзывы:

Похожие инструкции для DCP-300

Бренды по названию

Популярные бренды

M-Audio DCP-300, Руководство пользователя

Результаты поиска

Содержание DCP-300

Отзывы:

Похожие инструкции для DCP-300

Бренды по названию

Популярные бренды