M-Audio DCP-300, Руководство пользователя

Страница: 41 / 62

User Guide
41
DCP-300
Function
TOUCH
Touch Select Mode
The Touch Sensitivity setting, sometimes referred to as the velocity curve, lets you decide how the pressure
with which you hit a key determines the volume at which the note plays. DCP-300 provides you with three
different sensitivity options:
<
Normal is the default setting, and is designed to be useful for most players with an “average” touch
(i.e.: people who play with an average amount of force).
<
Low is a sensitivity setting that generates lower velocity values for the same force. This setting is useful
for playing more quietly, even if you tend to strike the keys harder.
<
High is a sensitivity setting that generates higher velocity values for the same force. This setting is
useful for playing more loudly, even if you tend to strike the keys with less force.
<
Fixed is essentially the “off” setting, effective when when the Touch button is not lit. The same velocity
value is sent regardless of how hard or how softly you strike the keys. The default Fixed velocity value
is 100 (on a scale of 0-127), and can be adjusted (see next page).
‣
To select a Touch Sensitivity setting (Normal, Low, or High):
With the Touch button lit, press and hold the
Touch button to enter Touch Select Mode.
While continuing to hold down the Touch button,
use the Data Control knob (or the Transpose or
Tempo Up/Down buttons) to select the desired
Touch setting.
As you turn the Data Control knob, the LCD will
scroll through the available Touch settings. (The
“NORMAL” Touch setting is shown in the example
below).
Touch: Normal
1
2
Note: Pressing the Transpose up and
down buttons together while in Touch
Select Mode will reset the Touch
function back to its default value of
Normal.
✔