User Guide
20
DCP-300
Song Playback
During song playback, the Track buttons are used to determine which tracks will be audible during playback.
‣
To start song playback:
Press the Track button of the track you wish to hear, so
that the button lights up. (If the desired Track button is
already lit, you can skip this step and proceed to Step 2).
Note that if there is nothing recorded on the track, the Track
button will not light up, even if you press the button.
Press the Play button to begin playback.
Note that pressing the Play button again during playback
will stop playback.
Also note that during playback, either (or both)
Track buttons can be pressed at any time to make the
corresponding track audible or inaudible. Playback will
continue until the end of the recording, even if neither Track
button is lit.
‣
To play a previously recorded track while recording a second track:
Press the Track button of the previously recorded track
you wish to hear, so that its blue LED is lit.
(If the Track button for the track you wish to hear is already
lit, you can skip this step and proceed to Step 2).
1
2
1
TRACK 1
Sequencer
Controls
TRACK 1
Sequencer
Controls
PLAY
Sequencer
Controls
Содержание DCP-300
Страница 1: ...User Guide ...
