MM-007024-001
23
2.
Deburr all newly drilled mounting holes.
3.
Set the bracket in place, and install and tighten the mounting screws.
4.
Verify the bracket is firmly secured to the mounting surface. A secure mount prevents unreasonable
vibration, which could damage the radio and/or cause its cable connections to loosen.
6.2 MOUNT THE RADIO INTO THE BRACKET
The radio should now be mounted into the bracket according to this procedure:
1.
Attach the radio into the Base Bracket using three #8-32 pan-head screws (Item 5 in Table 4-1) per
side. Tighten all six screws with a screwdriver until the lock washer on the screws are fully
compressed and the radio is firm and flush in between the brackets.
2.
Check the mounting area for proper clearance for cable service looping and for air circulation, plus an
area to secure and rest the excess cable lengths.
NOTE
Proper mounting is one factor that ensures optimal radio performance. An improperly
mounted radio may experience degradation in the quality of voice and data
communications.