
08/09/2020
NanoVNA User Guide | NanoVNA User Guide
https://cho45.github.io/NanoVNA-manual/#7-
トレース状態
40/51
Generate...
Click the button and create a .dfu le with a suitable name.
Writing rmware with DfuSe Demo
First boot the device in DFU mode. Use one of the following methods to enter DFU mode.
Turn on the power by jumpering the BOOT pin on the PCB. (After turning on the power, remove the jumper.) The screen
becomes white but it is normal.
CONFIG
→DFU
RESET AND ENTER DFU
Select
Launch the DfuSe Demo. Make
STM Device in DFU Mode
sure that it is in Available DFU Devices
Choose...
and click.