08/09/2020
NanoVNA User Guide | NanoVNA User Guide
https://cho45.github.io/NanoVNA-manual/#7-
トレース状態
28/51
Temporarily stop measurement
STIMULUS
PAUSE SWEEP
Select to temporarily stop the measurement.
Calibration and setup recall
You can save up to 5 calibration data. The NanoVNA loads the data of number 0 immediately after starting.
Calibration data is data that includes the following information.
Frequency setting range
Error correction at each measurement point
Trace setting status
Marker setting status
Domain Mode Settings
Setting wavelength reduction rate
electrical delay
