PEC 1864 Reference Manual - Rev 1.2
© 2017
LYNX
Technik
AG
Page 33 of 41
•
Video Source (Display only)
•
Audio Source: Off (no audio), HDMI Video,
SDI Video, Analog Audio Input
Default = Selected Video Input)
The Stream settings are different for the different streaming formats.
TS over UDP
Transport stream over UDP is used to stream a signal to a dedicated IP address using the
UDP protocol which can be a specific decoder or a multicast IP address. The PEC 1864
allows the user to add a session announcement protocol (SAP) to the stream.
The following settings are available (in addition to the global streamer settings):
Protocol Settings
•
Destination IP address
(Default = 239.252.20.101)
•
Port: 1-65535
(Default = 4444)
•
Multicast TTL (Time To Live): 1-255
(Default = 3)
Note: Multicast TTL is the max. number of
routers the stream can pass
Multiplex Settings
•
Multiplex Mode: CBR, VBR, RVBR
(Default = VBR)
•
Multiplex Bitrate: 200kbps to 50Mbps
(Default = 8Mbps)
•
PBR delay: 300ms to 1500ms
(Default = 1000ms)
•
Service Name: free text
(Default = PEC1864 [Stream1])
•
Provider Name: free text
(Default = LYNX Technik AG)
•
PMT PID: 17 to 8190 (Default = 40)
•
Service ID: 123 to 8765 (Default = 200)
Note:
CBR: Constant Bitrate; VBR: Variable Bitrate;
RVBR: Restricted Variable Bitrate (limited upper bandwidth;
PBR: Policy Based Routing; PMT: Program Map Table
