Lynx L15ICE, Руководство пользователя и инструкции по установке

Страница: 18 / 23

Lynx L15ICE 18
SUBJECT: BIN CONTROL ADJUSTMENT FOR HIGHER ALTITUDE
The thermostatic bin control utilized on the Lynx ice machines is
factory set for normal operation. The factory setting is marked
on the bin control label with a red dot. It may be necessary in
areas of higher elevation to make an additional adjustment.
The installation instructions recommend checking the bin control
for proper operation during the start up of the unit. To check the
bin control, hold ice on the thermostatic bin control bulb. The
unit 'should cycle off within 6 to 10 seconds. If additional
adjustment is required due to higher altitude, turn the bin control
adjustment towards warm 1/8. turn and check again. When adjustment
is correct, the unit will cycle off as described above.
Maintenance
L15ICE
IMPORTANT
The icemaker must be maintained individually, referring to the instruction manual and labels provided with the
icemaker.
1) Exterior
To keep the exterior clean, wipe occasionally with a clean and soft cloth. Use a damp cloth containing a neutral
cleaner to wipe off all oil or dirt build-up.
2) Condenser
Check the condenser once a year, and clean the coil if required by using a brush or vacuum cleaner. More
frequent cleaning may be required depending on the location of the icemaker.