Lynx L15ICE, Руководство пользователя и инструкции по установке

Страница: 15 / 23

Lynx L15ICE 15
Cleaning and Care Procedures
L15ICE
7) Spread out the tabs on both sides to unlock the water tank, and
pull it out toward you. Soak the water tank in the sanitizing
solution for 10 minutes.
8) Lift off the ice chute from the front frame pipe and then from the
rear frame pipe. Soak the ice chute in the sanitizing solution for
10 minutes.
9) Pull the discharge tube from the spray assembly. Remove the
assembly by pulling it toward you.
10) Remove the two caps. Soak the caps and the spray assembly in the
sanitizing solution for 10 minutes. If the nozzles are clogged, clean
them with a wire or a suitable brush.
11) Refit the two caps in their correct positions. Make sure the reducing pipe is
in place in the center.
12) Slide in the spray assembly along the rails on the right and
left brackets. Refit the discharge tube securely on the spray
assembly. A loose fitting may cause a water leak.