HDR Static Quick Ref Guide Rev 2.0
www.lynx-technik.com
4 |
P a g e
greenMachine Static in Quad 3G Config.
greenMachine Static in 4K UHD Config.
4.
Video/Audio Connection
Connect your HDR Video Signal to the input port/s provided at the back panel of the greenMachine. A user can either select to
use four 3G SDI inputs or one 12G SDI/fiber input depending on the requirement. greenMachine provides four 3G SDI outputs
or one 12G SDI/fiber output.
For example, if the input video signal from the Camera or any other video source is connected to SDI input 1, on the greenMachine,
on greenGUI
Control> Main
would display a similar page as shown below:
Connect the input ports on the greenMachine as required, considering the limitation of each input and output port. Check
greenMachine ports detail in the back-panel picture, as shown above.
5.
Reference input connection
Connect the video reference input port on the greenMachine to a reference source. In case no external input reference source is
available, the user can take the input video signal as the reference source as shown in the picture below:
greenMachine Static in Quad 3G mode
Config.
greenMachine Static in 4K mode Config.
