Reference Manual C AD 3100 Version 1.1
Page 15
!
!
Electrical Installation.
Stand Alone Operation
The MiniModule requires the R PS 3001 power brick
option for stand-alone operation. Three versions are
available: R PS 3001 E for European markets, R PS
3001 U for the US markets and the universal IEC
desk power supply R PS 3001-3. Please ensure you
have the correct power option for your region. The
connection to the module is made with a small 5-
pin connector, which has a twist bayonet securing
system. Please make sure the connection is solid
and locked in place. A strain relief is included within
the module to prevent excessive strain on the
connection.
Signal connections should be made with care,
please ensure connections are correct and
compatible equipment is feeding / receiving the
signals from the module or damage can result.
Caution.
Only use the optional Lynx R PS 3001
power modules. Ensure the 5-pin power
connector is locked securely in place.
Caution.
Care needs to be taken when using
the module in this way, if it is not physically
secured. Keep the module away from the
floor to avoid the risk of someone stepping or
tripping on the unit, and locate the unit away
from excessive sources of heat and any
sources or moisture.
Multiple Units
When installing multiple MiniModule units it is
recommended you use the R FR 3005 Rack Frame 1
and / or R FR 3010 Rack Frame 2 options. Please
refer to the documentation supplied with these
options for details on electrical installation.
