Lynx AES16, Руководство пользователя

Страница: 39 / 82

Getting Started
AES16 User Manual 39
•
Check the Lynx Output mixer and confirm meter activity for Digital Out 1L and Digital Out 1R. If you
have speakers or headphones connected to your destination device, you should also hear audio and see
meter activity.
If the test did not operate as described or you received any errors, please refer to the
“Troubleshooting” section of this manual.
OS 9
The installation of your AES16 can be tested using the Demo version of Bias Peak that was included
on your AES16 Installation CD. This is a quick way of verifying that the AES16 card is installed
correctly and is connected correctly to your external equipment.
•
Install the Bias Peak demo that is included on the AES16 installation CD, by clicking on the
####### file and following the installation instructions.
•
Install the Bias Peak demo that is included on the AES16 installation CD, by clicking on the
####### file and following the installation instructions.
•
Locate “Dialtone.wav” on the AES16 Installation. Drag the file to the computer’s desktop.
•
Connect the outputs of the AES16 to a digital destination (digital mixer, DA converters, etc.) capable of
delivering an audio signal for listening via headphones or speakers. Depending on your external gear, you
may be using the CBL-AES1603, CBL-AES1604 or CBL-AES1605 cables - please check the ##### of
this manual for details on correctly connecting these cables to your equipment. Verify that Digital Out 1 of
the AES16 is connected to your external equipment. This is the output used for this test.
•
Before testing playback, the clock relationship between the AES16 card and your external device
must be established. For this test, the AES16 acts as the clock master while your external device
is a clock slave. Consult the manual for your connected equipment to determine how to set it to
receive sample clock from a digital input. Most digital devices offer several choices for sample
clock status, with “Internal” generally being the default. If your device does not have the ability
to receive its sample clock from a digital input, please consult the studio diagrams section of this
manual (page ?) for information on creating an alternate clock relationship with the AES16.
Keep in mind that the sample clock source of the AES16 is set to “Internal” primarily to