Lyngdorf TDAI-3400 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 47

Lyngdorf TDAI-3400 Скачать руководство пользователя страница 39

39

Manage Software

From this main menu, you can access TDAI-3400 software information, backup, restore, etc.

Backup

Make a complete system backup to the SD card or a USB drive connected to one of the USB A connectors.

It will include all settings, the

speaker setup and RoomPerfect™ calibration. When the backup is complete,

the TDAI-3400 will go into standby mode.

Restore

Restore the system from a backup stored on the SD Card or on a connected USB pen drive.

Factory Reset

Restore the system to the default factory settings.

Note: All user preference settings, system data, and RoomPerfect™ data are lost when the TDAI-3400 is

restored to the default settings.

Download system log

To be used when reporting on bugs identified during use. A file with the system log will be stored on your

device. If you identify a problem, please send this log together with a copy of the Backup file to

[email protected]

for reference.

Update Software

Shows reference information about the current software in the TDAI-3400 and shows eventual newer

software available from the remote server.

«
...
37
38
39
40
41
...
»

Содержание TDAI-3400
















































Отзывы:

Нет отзывов