Lyngdorf TDAI-3400, Руководство пользователя

Страница: 20 / 47

20
Home Screen / IP Interface
Installation and Operation via IP Interface
With the TDAI-3400 connected to your local network, on the remote press INFO twice to reveal the IP
address allocated by the router. Open a browser and write the IP address to access the TDAI-3400.
If you are using an apple product you can also access the device by entering http://tdai3400.local/ in your
browser.
As default the TDAI-3400 will use a dynamic IP address. If you want to use a static IP address, you can set
this at any time in the Network Setup menu.
If the TDAI-3400 is still in initial setup, you will be guided through the procedure just like on the display
operation.
The HOME screen refers to the daily operation as performed with the remote control. The page displays
selected input and formats and you can control the volume setting.
The HEADPHONES section can be accessed, when a pair of headphones are connected to the TDAI-3400
on the front panel connector. Here you can adjust volume settings and mute the output.
The SETUP section will be described in the following pages.
The interface for controlling the built-in media streamer is found in the bottom section of this page. For
information as to the use of the interface see section for Streaming Setup.
Hot tip:
On your mobile device, the Home Screen page of your amplifier can be saved as an icon
for swift access to operation of the TDAI-3400.