Lyngdorf TDAI-3400, Руководство пользователя

Страница: 34 / 47

34
HDMI Setup
What is CEC?
Consumer Electronics Control (CEC) is an HDMI feature designed to allow you to command and control
CEC-enabled devices that are connected through HDMI, by using only one of the remote controls (for
example, controlling the volume level in the TDAI-3400 by using the remote control of the TV).
The level of CEC implementation depends on the manufacturer of each product, and even if brand new, not
all electronic devices supports CEC. As the television is
“CEC master” in a HDMI setup, the CEC
implementation of the television will determine, what is possible for the entire system.
Enable CEC
Enables and disables CEC (Consumer Electronics Control) over HDMI.
HDMI output
When enabled, this feature will send the current digital stereo signal though the HDMI cable to the TV.
This feature requires that the digital output has been configured under the Output Setup menu. The digital
output should be set to Full-range and Full-scale.
Notes:
As default, CEC is not activated on HDMI to comply with stand-by power regulations.
CEC functionality only works with the TDAI-3400 set in Network Stand-By.
CEC is marketed by manufacturers under individual names and designed for promoting
the connection of same brand sources. (SONY: Bravia Link, Panasonic: Viera Link, etc.)
Streaming Setup
The TDAI-3400 can access radio stations from the internet, music files on your local network or on a FAT32
formatted USB drive or you can stream music to the TDAI-3400 from your mobile devices.
In this menu you can configure the basic setup of the music streaming:
•
Streaming players can control volume: Set to Off or On.
•
Streaming players can change input source: Set to Off or On.
•
Streaming players can power on the device from standby mode: Set to Off or On.