LY International Electronics H-3300 SERIES, Руководство пользователя

Страница: 8 / 14

microphone Y type branch cable), one male-female XLR cable,one RCA-6.3 mm jack audio cable
and one power cable
13 m
- Chairman microphone and delegate microphone are supplied with a branch/interconnection Y
type cable (2+1.5 meters) with one female DIN-8 connector for connection to the main extension
cable or to the previous microphone, 2 male DIN-8 connector for connection to microphone and
extend the line to the next microphone
②
Connect the main extension cable ( male DIN-8 13 m) to one of the sockets group (DELEGATES)
of the controller. In each of the 4 lines you can connect 30 mics maximum. Connect the other end
of the extension cable ( female DIN-8 13 m) to Y type microphone branch cable ( male DIN-8 2 m),
connect the chairman or delegate microphone to the Y type microphone branch cable ( male DIN-8
1.5 m), and the male DIN-8 connector to the next Y type microphone branch cable ( female DIN-8
2m) to extend the microphones
Note: Paying attention not to connect more than 30 microphones units to each line and no more than
64 microphone units altogether, microphone quantity in one system may decreased according to
different microphone type and cable length.
③
If desired, contact any of the line-level outputs (balanced XLR or unbalanced RCA) to the input of
an amplifier.
④
Connect the controller to 230 V AC 50/60 Hz mains by power cable.
⑤
To talk on a microphone, please press the on/off key. When you finish talking, turn off the
microphone by pressing the key again. If microphone is active, indicator light switches on.
⑥
When chairman press and hold the PRIOR key 1 second on chairman microphone unit, all active
delegate microphones will be switched off and the chairman microphone will active.
For discuss function
Fig.4