Activation and Deactivation of previous Operating Modes
Using the
MODE
button (
fig. 1 ref. 2)
, select the desired operating mode
and press
SAVE (fig. 1, ref. 4)
. If
the mode requires a numeric limit of delegates, this can be selected pressing the
Number
button (
fig. 1, ref.
3
) and pressing
SAVE
to complete the setup.
FUNCTIONS:
C. ONLY MODE
When this function is activated, the display will show “C.ONLY MODE” followed by the check mark “√”.
When deactivated, the display will show “X” beside this function.
C.ONLY MODE √:
When the PRESIDENT presses the
PRIORITY
key
(
fig. 3, ref. 3
), all DELEGATES will be
excluded, and the DELEGATE microphones will not reactivate when their
MIC ON/OFF
key is
pressed. These will remain excluded until the PRESIDENT again presses the
MIC ON/OFF
key.
C.ONLY MODE X:
When the PRESIDENT presses the
PRIORITY
key
(
fig. 3, ref. 3
), all DELEGATES will be
excluded, but the DELEGATE microphones will be reactivated normally when their
MIC ON/OFF
keys are pushed.
In either case (C.ONLY MODE “√” or “X”), the number of DELEGATES who can speak simultaneously
will be determined by the previously selected limit.
A. OFF MODE
When this function is activated, the display will read A.OFF MODE followed by the check mark “√”.
When deactivated, the display will show “X” beside this function.
A.OFF MODE √:
All activated DELEGATE stations will be automatically disactivated after 45 seconds of inactivity.
In order to speak again the delegate will have to press MIC ON/OFF again (
fig. 3, ref. 2
)
A.OFF MODE X:
There are no time limits for the activated DELEGATE bases
This function does not affect the PRESIDENT base
MUSIC MODE
When this function is activated the display will read MUSIC MODE followed by the check mark “√”.
When deactivated, the display will show “X” beside this function.”
MUSIC MODE √:
When the PRESIDENT presses the
PRIORITY
button (
fig. 3, ref. 3
), the DELEGATE speaker
monitors will reproduce a warning tone.
MUSIC MODE X:
When the PRESIDENT presses the
PRIORITY
button (
fig. 3, ref. 3
), the DELEGATE speaker
monitor will not produce a warning tone
AUTO CODING
Each mic has a number ID which is affected (very important to setup the auto-track and voting function
Controller:
- The controller starts the setup of the mic code by turn on the con hold and press
Number
button (
fig. 1, ref. 3
)
- For that, use the buttons
MODE
and
Number
to select the start number,once the selected start
number, press
SAVE
button, operator can start coding, usually system setup the code from 1
- In general, you assign number 1 to the chairman mic.
- The first setting code will transmitted to all the delegate mic.
.
Содержание H-3300 SERIES
Страница 1: ...OWNER S MANUAL DIGITAL CONFERENCE SYSTEM H 3300 SERIES ...
Страница 13: ...Method 2 fig 8 ...