LX Navigation d.o.o LX Mini Map V 1.4 May 29
th
2011
30
8.5.2
How to input a new task?
Task Edit menu is a sub page of NAV menu in fact
NAV 2/3
menu. The menu will become operative after click on
TASK EDIT
button of touch screen.
After press on Task Button,
Task Overview
window will open and last flown task will be listed. By no task only
(
add waypoint
) will be offered. Double click on add waypoint will open the dialog and waypoint selection could
start. The first selected point is task
start point
. During selection process the pilot should define if a conventional
speed task or an
AAT
will be flown. After AAT selection (AAT ON),
AAT time
given by competition director
should be entered. AAT sector geometry can be annotated to correspond to individual sectors of the task. Flying an
AAT makes change over philosophy of high importance, so define in
Auto advance
.
-
Manual:
change over will happen promptly after command execution
-
Auto:
change over will happen automatically after sector will be reached (suggested for racing task)
-
Arm:
the pilot is able to arm task start before reaching the line, after reaching the line, start will be
executed automatically, change over to next turn point inside point sector is manual
-
Arm Start:
arm is valid only for start
Note!
It is important to select a turn point file which includes turn points of interest in
System setup
under
number 1
(Site). Remember that LK 8000 is also capable to use
.CUP
files as a turn point data base. The turn point files should
be simple copied into
Waypoints
folder of LK 8000.
The last point is
finish line
and this should be declared before point selection.
Rest commands:
Clear:
will
clear
all points of the task
Calc:
offers
task calculate
menu, described separately
Load:
will
load
an already stored task
Save:
will
save
active task
Declare:
will
send
declaration to flight recorder
Analyses:
will open flight analysis
ETE
: time elapsed is connected with settings done in
Calc
and couldn’t be edit from this menu
