LX Navigation d.o.o. LX 7007 C May. 30th 2012
- 21 -
Important!
Incorrect area setting will make your Flarm inoperative.
•
LAT/ LON:
degrees and decimal minutes; or degrees, minutes and seconds
•
Distance:
kilometers (km); nautical miles (NM); or statute miles (ml)
•
Speed
kilometers per hour (km/h); knots (kts); or statute miles per hour (mph)
•
Vario:
meters per second (m/s); or knots (kts)
•
Heading:
degrees magnetic ( °M) or degrees true (°T)
•
Wind:
kilometers per hour (km/h); knots (kts); miles per hour (mph); or meters per second
•
(m/s)
•
Altitude:
meters (m); or feet (ft)
•
QNH:
millibars (mb); millimeters of mercury (mm); or inches of mercury (in)
•
Mass:
kilograms per sq meter (
kg/m
2
); pounds per sq foot (
lb/ft
2
);
kg, or lbs…….
•
Temp:
deg Celsius or Fahrenheit
2.3.2.12 Voice
If Voice module is connected to LX 7007 C (connection via 485 bus)
following settings will settle Voice module operation.
Checked items means active function and vice versa.
Flarm part is relevant only if the unit is equipped with
Flarm option.
2.3.2.13 Flarm
Item Flarm is only active with units which are equipped with Flarm module.
The upper four rows are information only, the last two rows enable
inputs. Region input will adjust frequency relating to the area
of operation. Privacy Yes will reduce the data which is sent, so that gliders
near to you will not receive complete data about you, but they will be
warned for sure. When privacy is enabled your Flarn will show reduced
data about all near gliders, even they don’t use privacy mode.
This is some kind of punishment, so if you don’t send complete data
you will be also not fully informed about other gliders.
More about Flarm see in capture 3.
2.3.2.14 Local time
Adjustment of UTC time to local time is possible.
2.3.2.15 NMEA output
LX 7007 C is capable of sending NMEA data to third party units
such
as PDA and PNA. The data is available on the connector
marked PDA. Six data strings are offered.
