LV switch IPPBX3000, Руководство пользователя

Страница: 91 / 195

LvSwitch IPPBX 3000 Manual
89
Permission Set the permission of the trunk, the options are
internal,enterprise,local,national long distance and
international long distance.Default value is internal
Overlap receiving Select "yes", and the caller initiates the call by
overlapping sending mode. Select "no" and the caller
initiates the call as a whole. The default value is
"yes".If the other party only provides the whole
transmission, you can choose "no" to save DSP
resources.
DID Number Selects the number displayed in the exit of the
sub-bureau, and the default value is "none". Generally,
"DID number 1" is selected.
Route Group The left button in the drop-down box selects the routing
group to which it belong, and the default is "default"
routing group
Switch Type Set the switch type of PRI trunk and the default value is
national.
Provide the several types:
National : National ISDN type2 (common in the US)
ni1: National ISDN type 1
dms100: Nortel DMS100
4ess: AT&T 4ESS
5ess: Lucent 5ESS
euroisdn: EuroISDN
qsig: Minimalistic protocol to build a "network" with
two or more PBX of different vendors
Calling Nai Select the properties of the caller, provided by the
ISP.Default value is national long distance.Including
domestic long distance, international long distance,
local , special number and unknown 5 options,
Called Nai Select the properties of the called person, provided by
the ISP.Default value is national long
distance.Including domestic long distance, international
long distance, local, special number and unknown 5
options.
Caller ID Select "yes" to enable caller id on the relay.
Select no to turn off the caller id on the relay.The
default value is "yes".
Call Transfer - Display original caller Select yes,the calls through PRI trunk will display the
caller number,select no it will not display.The default
value is yes.
Fax Select "yes" to enable faxes on the relay.
Select no to close the fax on the relay. The default value
is "yes".