LV switch IPPBX3000, Руководство пользователя

Страница: 149 / 195

LvSwitch IPPBX 3000 Manual
147
Figure 6-131 PCM Settings - Channel Mapping Table
In the case of E1
：

PRI
：
16 channels are dedicated signaling channels
。

SS7
：
You can use the 1 to 31 channel according to the peer negotiation.
。

Description
：
When the E1/T1 interface is connected
，
Both parties must be identical on the E1/T1 interface parameters.
，
Because both E1/T1 cannot have signal loss/frame out-of-synchronization/multiframe
out-of-synchronization/slip code conditions
，
Because the inconsistency of individual characteristic
parameters will cause data channel failure / error code / slip code / out of step, etc.
。
These characteristic
parameters are: impedance / frame / line coding / CRC check,The above parameters need to be negotiated
with the peer when docking.
6.4.3 Prompt Tone
All prompt tones used in system are managed in this page. Select "Voice Config>>PBX Settings>>Prompt
Tone" to open the page as shown in the following figure.
Figure 6-111 Prompt Tone
Add a new voice prompt file
Click <Add> button to open the page as shown in the following figure.
Figure 6- 112 Add a Voice Prompt File
Click the <Browser> button to select local file, and then click the <Upload> button to upload the voice file.