LV switch IPPBX3000, Руководство пользователя

Страница: 185 / 195

LvSwitch IPPBX 3000 Manual
183
Item Description
Threshold threshold. Enabled by default, the default value is 99.
RX Threshhold
Send TRAP alarms when the network interface incoming traffic
exceeding the threshold.
Enabled by default, the default is 20480.
TX Threshhold
Send TRAP alarms when the network interface outgoing traffic
exceeding the threshold.
Enabled by default, the default is 20480.
Notice Before Restart
The device runs the reboot command, send TRAP alarms before the
device restarts. Enabled by default.
WAN Port Address
Change Notification TRAP alarm is sent when WAN port address change, TRAP content
includes the new WAN port IP address. Enabled by default.
Device Information
Notification Send TRAP alarm when WAN address change, reboot device, access
device or SNMP program is started. Enabled by default.
The configuration on the management device and the
one on the managed device need to be the same.
Otherwise, the operation can not be performed.
10.6 TR069 Configuration
TR-069 (CPE Wide Area Network Management Protocol) provides a common framework and protocols for
managing the configuration of user network devices in next generation networks. The device can be centrally
and remotely managed via ACS (Auto Configuration Server) on the network side.
Select “System > TR-069” to enter the “TR-069” page, as shown in Figure 10-9.