LV switch IPPBX3000, Руководство пользователя

Страница: 44 / 195

LvSwitch IPPBX 3000 Manual
42
text box below.
Select IPv4 / IPv6 as the protocol type , configure IPv4 protocol and IPv6 protocol respectively. The device can
access the network through both IPv4 and IPv6.

Static IP
In the "Basic Settings" page, select "Static IP" from the drop-down list box as shown in Figure 4-4.
Figure5- 4 Static IP Page
Select "IPv4" as the protocol type. ISP will provide fixed WAN port IP address, subnet mask, gateway address and
IPv4 DNS server address. Users should manually set these options.
Select the protocol type as IPv6 and set IPv6 global address and IPv6 default gateway access mode. Select the
IPv6 DNS mode to use Dynamic DNS or manually specify the primary and secondary DNS server addresses. If
the MTU is not set, There is a default value.
IPv6 Configuration Item Description:
IPv6 Global
Address
Obtaining
Method
No status Automatic configuration: Automatically
generates an IPv6 address by the product based on the
advertisement information of the remote router when
the product first time connected to the network.
Manual: Configure the IPv6 address and network
prefix length in the text box below.
IPv6 Default
Gateway
Obtaining
Method
No status Autoconfiguration: Automatically generates
an IPv6 Gateway address by the product based on the
advertisement of the routing information sent by the
peer end when the product first time connected to the
network.
Manual: Configure the IPv6 gateway address in the
text box below.
Select IPv4 / IPv6 as the protocol type , configure IPv4 protocol and IPv6 protocol respectively. The device
can access the network through both IPv4 and IPv6.

DHCP way to obtain the WAN port address
Select "DHCP" in the "Connection Type" drop-down list on the "Basic Settings " page as shown in Figure4-5.