15
8.
Assembling the breath shield ( E )
• Pull out the two fixing pins from the chin-rest.
• Get rid of the paper package and let the pins go through its holes.
• Insert the fixing pins into the hole again.
H
Pin
2.3 Checking procedure after assembling.
1.
Power plug
• This instrument supplies a 3-wire cable. Please select a proper power socket
as matched.
• Ensured that the instrument is grounded well.
Important Matters
Please use the special cable supplied with this instrument.
2.
The power box and the illumination part
• When the main power switch (8) of the power box is placed at “I” it turns
on, and “O” for turn off. The main power switch should be set at the “O”
position before connecting the input cable with the power socket.
