luxvision SL 1400 Скачать руководство пользователя

Страница: 51 / 74

11. Assembling the remote shutter line (M)

• Screw one end of the remote shutter line into the remote cord socket (63).

• Place the other end of the remote shutter line near the operation knob.

6.4 Inspection Procedure

1. Checking power plug

• The instrument is supplied with a 3 wire plug please select proper power

outlet matching it.

• Make sure that the power supply is properly grounded.

Important Matters

Please use the special power cable supplied with the instrument.

2. Checking the camera, motor-drive and photographic power supply.

• Check whether the batteries have been installed in the camera and the motor-

drive.

• Turn on the camera and motor–drive power switches.

• Turn on the photographic system power switch and ensure that the pilot

lamp and the charge lamp have illuminated.

• After the charge lamp illuminated, press the remote shutter button and ensure

that the Xenon lamp flashes and the motor–drive operates.

• Check the beam splitter, set the joystick at the “IN” position, so that the light

shines into the camera. Now, the image light from the lens is dim. For non-
photographic use set the joystick to the “OUT” position.

• Turn the power switches off after finishing the inspection.

Содержание SL 1400











































































Результаты поиска

Содержание SL 1400

Отзывы:

Похожие инструкции для SL 1400

Бренды по названию

Популярные бренды

luxvision SL 1400, Руководство пользователя

Результаты поиска

Содержание SL 1400

Отзывы:

Похожие инструкции для SL 1400

Бренды по названию

Популярные бренды