• When the diffusion lens is being used set the slit size to full aperture (9mm)
and set the background illumination setting to the occluded position.
6.5.5 Precautions
• Set the joystick of the full frame attachment at the “IN” position.
• Failure to correctly adjust the diopter setting of the oculars may result in out
of focus photographs.
• Always ensure that the charge lamp is illuminated before pressing the shutter
release. Charge time is approximately 6 seconds.
76
Alarm light
• Only the image from the right ocular is used for photography, therefore carry
out the alignment and focusing using only the right ocular.
• When the microscope and the illumination arm are placed in a straight line
(0) the picture may be obstructed and a shadow may be caused by the long
mirror, shaft or, diffusion lens.
• Avoid changing the flash intensity selection when the Xenon lamp is activated
or when the power supply is being charged.
• Always check the number of available frames, when all frames have been
exposed, the alarm lamp will illuminate. Turn the motor-drive switch (76) off,
rewind the film and then remove the exposed films.
56
