luxvision RU-1400, Руководство пользователя

Страница: 12 / 24

8.
In order to keep the lamp horizontal, one person should buttress the lamp in
this step. Adjust the lamp to the right position, and fix the four screws unscrewed
from the LongRod to the corresponding position and make them tightened, (fig.7).
See the figure 11.
Fig.11 Assembly the Lamp
9.
After the ShortRod, LongRod and the Lamp has been set up, you should adjust
their position to keep the ShortRod and LongRod vertical to the ground. At last,
tighten each screws (fig.5, 8 ,9).
10.
Unscrew the three bolts and nuts on the chair of the MainPart. see figure 12.
Fig.12 Unscrew three bolts and nuts
Three bolts and nuts
11.
Align the three holes on the Back and their corresponding holes on the chair,
fix the Back to MainPart reliably with the three bolds and nuts. See figure 13.
12